I have just had a customer’s 98 Wrangler in for a squeaking noise.
On stripping down the front hubs a bright wear mark could be seen on the dust shield, on the N/S. On checking the hub, it was found to be a 2000>2006 hub. In 2000 Jeep changed the hub off-set by approximately 5mm, requiring the disc to have a shallower off-set. There is no reason why you can not run later hubs on a pre 2000 Jeep but you must change the discs to match.
The garage that carried out this work, could not been aware of the change that Jeep introduced. On the O/S the Wrangler was still running the stock 98 hub. So be aware, make sure the garage you use knows about Jeeps, otherwise they can cause more problems then they fix.
Posts
